15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 01/06/11 *complete part number by inserting ?s? for standard temp. or ?i? for industrial temp. all specifications subject to change without notice. unless otherwise specified all tolerances are: 0.25 in mm mechanical with integrated magnetics,tab down single port rj45 connector AR1015-1221_ 10/100 base-t ethernet application meets ieee 802.3 & ansi x 3.263 standards impedance: 100ohms transmit open circuit inductance (ocl): 350uh (min) @100khz,0.1vrms with 8ma dc bias always eu rohs/elv compliant, wave solder capable to 265c rj45 jack cavity conforms to fcc rules and regulations part 68, sub part f standard operating temp: 0oc to +70oc (see footnote) industrial operating temp: -40oc to +85oc (see footnote) 2.54 13.50 8.89 3.05 21.60 max 15.90 led-r led-l 4.06 3.5 yellow green back view p9 p10 p11 p12 p1 p8 allied AR1015-1221_ yyww electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 0.1v turns ratio chip: cable (3%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.5-100mhz 0.5-30mhz 30.1-60mhz 60.1-80mhz AR1015-1221_ 350 1ct:1ct 1.1 18 18-20*log(f/30) 12 electrical speci?cations @ 25c part number emi fingers led (l/r) cross talk (db min) cmrr (db min) 0.5-100mhz hi-pot (vdc) 0.5-40mhz 40.1-100mhz AR1015-1221_ no g/y 35 33-20*log(f/50) 30 2250
15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 01/06/11 unless otherwise specified all tolerances are: 0.05 in mm pcb layout schematics AR1015-1221_ AR1015-1221_ notes: 1. r1-r4=75ohms,1/16w,5%resistors. 2. c1=1000pf,2kv decouping capacitor. 3. led compliant with iec60825-1 saftety of laser products when operated up to 20ma. 4. led forward voltage: 2.1v(typ), led power dissipation: 105mw, led peak wavelength: green=565nm, yellow=5 with integrated magnetics,tab down single port rj45 connector 5h 8.18 11 9 10 12 5a 2. 54 3. 05 8. 89 1 1.43 15 .49 15 .90 2 .54 1 .27 4. 06 2 .54 5g 5b p11 p12 green p9 p10 yellow materials AR1015-1221_ housing: pbt, flammability rating 94v-o. shell: c2680 brass, 0.20mm thick, 50u" min nickel plating. mod jack contacts: phosphor bronze, 0.35mm thick, 6u" gold plated. led: diffused epoxy lens, 0.5x0.5mm carbon steel wireframe leads.
|
